Written by
People don’t usually think about water purifiers as long as the water is purified and the process is smooth. You fill up a glass, drink water, and go about your day. However, when you are moving to a new house and changing your kitchen setup, or notice something amiss with your purifier, you may be forced to analyze whether the processes are still the same as before.
Families who have Livpure water purifiers can take solace in the fact that they can get the right support during such times. When the need for inspection, repair, installation or regular maintenance of the water purifier arises, one can locate the livpure ro service center in kanpur and get it done.
The important thing is to not wait for the purifier to stop working completely. A little care from time to time can help prevent many big problems later on.
A New Kitchen Setup May Need a Fresh Look at Your RO
Moving to a new house means a lot of changes. You set up a new gas connection, rearrange the furniture and figure out the best place for each appliance in the new house.
Your water purifier should be looked into as well during this time.
The old place may have had a different water connection or electrical layout. The new kitchen may have different set up as well. Just placing the purifier in a corner and connecting it may not be the right thing to do always.
Check for these things before placing the RO purifier at a new location:
- – Ensure that there is enough space around the purifier.
- – Check the power socket and see if it is placed safely.
- – Check the inlet and outlet connections of the pipes.
- – Check if the unit is fixed properly if it is mounted on the wall.
- – Get a technician to check the RO purifier if it was disconnected and transported.
A professional can help diagnose issues that occurred while transporting the purifier. Get everything checked before your family starts using the purifier regularly.
There are several signs that can help determine if your purifier has a major fault, for example, the purifier takes longer to fill a glass, it makes a new sound, or water gets accumulated near the unit.
The purifier may switch on but may not dispense water. If there is a problem with the power supply or water connection, the purifier will not work. Otherwise, get it checked by a professional.
There is water around the unit: Always take leaks seriously, no matter how small they seem. Avoid opening the purifier yourself, especially if there are electrical parts nearby.
The taste seems different: Pay attention to any change in your water’s taste or smell, rather than trying to guess the cause. It may be related to filter condition or the quality of the water.
The machine keeps stopping: Repeated interruptions probably mean there is a problem that requires a thorough check.
If you experience any of the above issues, a Livpure RO Service Center in Kanpur can assist you in identifying and addressing the situation.
Don’t Assume Every Problem With Your RO Purifier is a Filter Problem
A lot of people think that any issue with their water purifier means the filters need to be replaced. This isn’t always the case.
A purifier has numerous parts. Of course, filters and membranes are important, but so are the pump, storage tank, pipes and connectors, and electrical parts. The whole purifier unit works together. So if one part of the purifier isn’t working properly, the whole unit can be impacted.
There could be numerous reasons for slow water flow, for example. It could be due to a clogged filter. It could also be due to something else. Water isn’t flowing through the purifier unit itself. There could also be a connection leak somewhere.
This is why a proper diagnosis is required. It could save you from unnecessary expenditures.
When you contact a service center, you can check to see if a part needs replacement, or if cleaning, adjustment or repair will fix the issue. This will help you make a more informed decision.
Simple Habit for Your RO Maintenance
I keep a small record of my RO system’s maintenance for a number of years now, and I find it surprising how useful it can be.
I don’t use any fancy system for this. I just make a note of it on my phone. I just make a brief note of the service date, work done, and parts replaced.
It can be really helpful in various situations. Imagine you’ve encountered the same problem with your RO system a few months back, and it has developed the same problem again. You don’t have to rely fully on your memory to recall the part that was changed previously.
A service record may include
- -Date of last service
- -Details of filter/membrane changed
- -Work done
- -Suggested maintenance and tips
- -next scheduled service
- A service receipt/bill is also a good thing to have, it may prove useful later.
Few things to check after service
After service is completed, there’s no harm in asking the technician to give you a simple demonstration on how the appliance works. Check for abnormal functions and noise. Look around for leakages, specially on connection of pipes.
Ask about maintenance tips and how to contact the service provider if the same issue occurs again, if any part of the purifier has been replaced.
Finally, always refer to the operation manual provided by Livpure for the specific model you own. Different Livpure models may have different features and maintenance requirements. Therefore, general tips that you may find on the Internet may not be applicable to your unit.
A visual inspection of the purifier may be a good addition to your routine kitchen check up. While doing your kitchen check up, take a quick look around your RO water purifier to see if there is any water leakage or if something is not right. Keeping the area where the purifier is placed clean may also be a good idea.
Maintaining a good habit of noticing when your household water supply changes and having it checked by a service professional if your water purifier needs an adjustment may also be a good idea.
Conclusion
A water purifier is an essential equipment in every household and deserves our attention. If you have recently shifted to a new house, noticed any change in the water flow or need your purifier to be checked for any reason, livpure ro repair service kanpur can be one of the options.
It is always better to take care of minor issues before they become major. Understand the reason for the problem, talk to the right person and get it checked by an expert. An ounce of prevention is always better than a pound of cure.
Frequently Asked Questions
- When should I get my Livpure RO purifier serviced?
It is recommended to service your purifier every 6 months. You also need to get your purifier serviced in case you find leakage or unusual noises, less water flow or any change in the taste of water.
- Can I shift my Livpure RO purifier to another house?
You can shift it to another house, but you need to disconnect it and install it carefully. The new place should have the necessary water and electrical connections. It’s better to take the help of a professional if you’re not sure about the installations.
- Why is my Livpure purifier dispensing water slowly?
Water may be dispensed slowly due to a blockage in the filter, an issue with the water supply, or other internal problems. An inspection of the purifier by a technician will tell you the exact reason.
- Should I change the RO filters myself?
It’s better to check with the manual for your purifier model or take the help of a technician for filter changes. Incorrect changes can affect the working of the purifier.
- What information should I share when booking a service?
You should share your purifier model number, what issues you’re facing, and if the purifier has recently been serviced. This will help the service person to understand what to check during the service.